# DeepCharts workspaces and upkeep before the open

> Templates and workspaces that load in seconds, end-of-day data, a compressed database, the RAM and diagnostic tools, and one symbol's history cleared without a reset.

Published November 16, 2026 · By the fillprint desk

The minutes before the US open belong to the market, not to the platform. A trader who rebuilds a footprint by hand at 9:25, or who discovers a sluggish chart at 9:31, has already lost the best part of the session. [DeepCharts](https://my.deepcharts.com/redirect/deepchart?affId=OFF&utm_source=fillprint&utm_medium=affiliate) (code OFF) gives you everything to avoid that: templates and workspaces that bring a full screen back in seconds, a clean way to add end-of-day data, a database you can keep lean, a built-in diagnostic, and a targeted way to clear the history of one symbol.

None of it takes long. Done in the right order, it turns the platform into a workstation that opens the same way every morning and stays fast through the session.

## Templates and workspaces: build once, load in seconds

A template stores one chart, a workspace stores the whole screen. The template keeps a chart's indicators, styles and settings: your one-minute NQ footprint, your five-minute profile view. The workspace keeps the full layout, several charts, their indicators and the profiles: your morning screen with three charts and a DOM. One template per analysis setup, one workspace per way of trading.

To save a template, right-click the chart, open Template and choose Save As. Load brings it back on any chart. Save as soon as a configuration works for you: it is the only way to reuse it on another chart or symbol without starting over.



Workspaces are handled from the name at the top right of the bar, Untitled until you save one, with New, Save as and Open. When you load a file, the File Picker offers three sources. Local keeps it on this machine, Cloud ties it to your account so it follows you to another PC, and Shared holds the ready-made files supplied with the platform. If you trade from more than one computer, save your own setups to Cloud.



## The bundled OrderFlow templates, tuned per symbol

The platform ships ready-made OrderFlow templates and workspaces for NQ, ES and GC, and according to the help center they come with every plan. In the File Picker, open Shared, then cloud/OF VERSION. Smart Essential, on five minutes with Big Trades, volume and profile, is a gentle starting point. Simple Orderflow puts a one-minute bid and ask footprint with CVD and key levels on screen. Advanced Orderflow adds Deep Profile, VWAP and Speed of Tape for the full picture. Each comes in several color themes, from DeepVision to Apollo or Neptune: only the palette changes.

Always load the file made for the symbol on screen. The footprint grouping and the Big Trades filter are tuned per market, and an NQ file on ES gives an over-compressed footprint. If the footprint itself is new to you, start with [reading a footprint chart](https://fillprint.io/en/journal/reading-a-footprint-chart).



| Template setting | NQ | ES | GC | What it changes |
|---|---|---|---|---|
| Footprint tick grouping | 4 ticks, manual | 1 tick, auto | 3 ticks, manual | Price covered by each footprint row: 1 point, 0.25 point, 30 cents |
| Big Trades filter, 5 min | 80 contracts | 170 contracts | 60 contracts | Smallest trade drawn as a bubble |
| Big Trades filter, 1 min | 60 contracts | 150 contracts | 40 contracts | Same, tuned for the faster chart |

These values are a standard, not a rule. Adjust the filter to the day's volume, as explained in [spotting large traders with Deep Trades and Big Trades](https://fillprint.io/en/journal/spotting-large-traders-deep-trades-big-trades), then save your version under your own name. Four full workspaces combine the templates, from Orderflow Essentials to DOMination, which puts ES, GC, NQ and CL books side by side.

## End-of-day data for the markets your feed does not cover

End-of-day history comes from a separate feed profile assigned to the exchanges you want. Open the Feed selector, then Feed Settings, click Add Connection, give the profile a clear name such as History, choose Historical as Feed Source and save. Then open Options, Symbol Manage, right-click the Data Feed cell of the exchange and pick that profile.



What to check first: each exchange holds a single profile. Keep CME and CBOT on your real-time feed, so ES and NQ keep their live data, and give the historical profile only to the markets your main feed does not cover. Connecting the real-time feed itself is covered in [the getting-started guide](https://fillprint.io/en/journal/getting-started-with-deepcharts).

## Database care: compress after the Friday close

Migrate / Compress keeps the local database lean without deleting anything. Every bit of history the platform displays is stored on your disk, and over months that store grows and slows startup, especially on a Mac running Parallels. Close the workspace, disconnect every feed, then open Options, Database, Settings and choose Migrate / Compress. Confirm, leave Compress switched on in the Utility window and click OK. [DeepCharts](https://my.deepcharts.com/redirect/deepchart?affId=OFF&utm_source=fillprint&utm_medium=affiliate) (code OFF) quotes a database up to 90% smaller, with a faster start.



The job takes several minutes and the computer must not sleep or shut down meanwhile. For NQ and ES traders, the natural slot is after the Friday close. Two related checks fit the same routine: a chart that stays empty while the feed is connected usually means a market tied to the wrong profile in Symbol Manage, and an L1 CME: Connection failed message points to a Windows component, solved by reinstalling Visual C++.

> **A weekly routine for a fast open**
> Friday after the close: Migrate / Compress, machine on mains power. Sunday before the session: load your workspace, check the RAM indicator, open one chart per symbol you trade and confirm each one is updating. Any new layout you built during the week gets saved to Cloud before you close.

## Diagnostics: RAM indicator, Diagnostic Report and logs

Three built-in tools tell you why a platform drags. The RAM indicator at the top right shows two numbers: total system memory, then the platform's own share in brackets. RAM 91% (2%) means the machine is full but something else is eating the memory, so close browser tabs and other platforms. If the bracketed number climbs, open fewer charts at once.



The Diagnostic Report, under the ? icon, then Contact Support, measures CPU, memory, ping to US and European servers and, once you click Click here to confirm, download speeds and VPN detection. Run it while the problem is happening. Log files sit in Documents, in the platform's folder, under Logs, dated by day: general, trading, trade_copier and various. Attach the files from the day of the incident to a support ticket, with a screenshot.

## Clearing one symbol's data

When a single chart freezes, shows gaps or prints wrong prices, clear that symbol's history and let the platform download it again. Disconnect the feed, close every workspace, then open Options, Database, Delete Data. Click Select Symbols and tick only the affected instrument, NQ-CME for instance. Set Select Start Date two to three days back for a recent freeze, or before the problem began for older corruption, choose the Data Type and click Delete. Restart, reconnect, and the history comes back.



Keep the start date tight. History the platform builds itself in real time, such as the order-level data behind Deep Trades, does not download again. If Delete Data is not enough, delete only that symbol's folder in the Database folder, with the platform closed. Deleting the whole Database folder is the full reset, kept for the rare case where every symbol misbehaves.

[Firms that run DeepCharts](https://fillprint.io/en/prop-firms?f=deepcharts)

> **[DeepCharts](https://my.deepcharts.com/redirect/deepchart?affId=OFF&utm_source=fillprint&utm_medium=affiliate) · code OFF** — Code OFF takes an extra 10% off the best DeepCharts offer of the moment. Sign up through our partner link and it is applied automatically; if checkout asks for a code, type OFF. [Get DeepCharts](https://my.deepcharts.com/redirect/deepchart?affId=OFF&utm_source=fillprint&utm_medium=affiliate)

---

Futures trading involves substantial risk of loss and is not suitable for every investor. fillprint is an independent publication, not a broker or a prop firm.

Some links are affiliate links: if you sign up through them, the firm or DeepCharts pays us a commission, at no extra cost to you, and often with a discount for you. Affiliate links are marked and carry rel="sponsored". Being an affiliate never moves a firm up the board. Firms without a program stay listed, marked “no affiliation”.

HTML: https://fillprint.io/en/journal/deepcharts-workspaces-and-maintenance · Prop firm data refreshed every 6 hours · © fillprint
